High Density Cartridge Heaters

Technical Specification

  • Heater Sheath: CrNi Steel
  • Insulation Material: Highly Compressed MgO
  • Heating Wire: NiCr 8020
  • Maximum Sheath Temperature: 1382 Deg F
  • High Voltage Stability <= 24v Nominal : 500VAC (cold)
  • High Voltage Stability > 24v Nominal: 1500VAC(cold) *Higher on request
  • Insulation Resistance: min. 5M Ohms @ 500 VDC (cold) >5M Ohms on request
  • Discharge Current: max0.5mA @ 253 VDC(cold)
  • Length Tolerance: /- 1.5%(min. /- 1mm) *Others on request
  • Resistance Tolerance: /- 10% smaller on request
  • Diameter Tolerance Standard: /- .002"
  • Diameter Tolerance Premium: /- .0008"
  • Maximum Voltage: 600V
  • Maximum Warranted Watt Density: 160 Watts/
  • In2Length of Unheated: Lead End = 5 to 25mm4-10mm; Disc End = 64-9mm; * Others on request
  • Maximum Length: 105" *Consult Engineering for your Diameter Size
  • Supported Diameters Imperial: 1/8", ¼", 5/16", 3/8", ½", 5/8", 11/16", ¾", 1"Supported
  • Diameters Metric: 3.1mm, 6mm, 6.35mm, 6.5mm, 7mm, 7.9mm, 8.9mm, 9.5mm, 10mm, 11mm,
  • 12mm, 12.5mm, 12.7mm, 13mm,14mm, 15mm, 15.8mm, 16mm, 17.5, 18mm, 19mm, 20mm,
  • 22mm, 25.4mm

Applications

  • Seal Bars
  • Torpedo Heaters For Injection molding
  • Injection Molding mainflds
  • Mass Spectrometry
  • Rubber Molding
  • Food Production
  • mmersion Tank heating
  • HVAC
  • Compressors
  • Fuel Cell
  • emiconductor
  • Medical Devices
  • Sensor Measurement Devices
  • Extrusion
  • Die Casting
  • Hotmelt adhesives
  • Heat Staking/ hle Punch
  • Plastic welding
  • luid heating

DOWNLOADS

ADDRESS

Mr. Vijay
Zerowatt Heaters
#1362, M.I.E. Part-B,
Bahadurgarh, Haryana-124507 (INDIA)

Phone no. 01276-268-000
Mobile : +91-9811519903

E-mail id : info@zerowatt.com

DISCLAIMER

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Pellentesque malesuada consectetur purus, id iaculis nisi feugiat non. Suspendisse potenti.

All images are copyrighted to their respective owners.

Copyright 2015 Zerowatt. All rights reserved.
`